Freedom

• Name: freedom
• Type: Outbound

Freedom is a protocol for outbound connections. It passes all TCP or UDP connection to their destinations. This outbound is used when you want to send traffic to its real destination.

ConfigurationObject

{
  "domainStrategy": "AsIs",
  "redirect": "127.0.0.1:3366",
  "userLevel": 0
}

domainStrategy: "AsIs" | "UseIP"

Strategy for domain name resolution. Options are:

• "AsIs": Default value. Resolve domain name by system.
• "UseIP": Use internal DNS for domain name resolution.
• "UseIPv4": Use IPv4 address only, after resolved by internal DNS.
• "UseIPv6": Use IPv6 address only, after resolved by internal DNS.

(V2Ray 4.6+) In UseIP mode, when sendThrough is specified in OutboundObject, Freedom will automatically choose between IPv4 and IPv6 address for destination based on sendThrough settings.

(V2Ray 4.7+) If sendThrough address conflicts with "UseIPv4" or "UseIPv6", Freedom will fail to dial out-going connections.

redirect: address_port

Redirect all connections to this address, in form like "127.0.0.1:80" or ":1234".

• When address is empty, e.g. ":443", Freedom will use the original destination address.
• When port is 0, e.g. "v2ray.com:0", Freedom will use the original port.

userLevel: number

User level. All connections share this level.